loconet – Model Rail Electronics

DS105 – Lnet Power HUB5

Model Rail Electronics — Tue, 05 Sep 2023 20:23:55 +0000

Version 1.1

This module can be used if the total power consumption on a LocoNet bus exceeds the limit of 500mA and to add a new power supply to the output connectors. An extra 4 pin screw terminal is included for easy connecting a standard voltage and current display. Optionally a 6 pin header can be added for bus experiments.

Sold as do it yourself project containing PCB and all components (no voltage/current display included).

LocoNet® is a registered trademark of Digitrax, Inc.

DS104 – Lnet I2C interface

Model Rail Electronics — Tue, 05 Sep 2023 20:19:53 +0000

Hardware version 4.1
Software version 0.90

This interface can be used to connect I2C modules like PCA9685 PWM module or one of our I2C modules to a LocoNet bus.

Sold as do it yourself project containing PCB and all components. An Arduino Nano 328P is sold separately. Our Arduino Nano sketch is available to be flashed on any Arduino Nano using our DS-Installer app. You can find this app on our downloads page. Also available is the DS-Configurator app for easy configuration of the DS104 interface settings.

LocoNet® is a registered trademark of Digitrax, Inc.

DS103 – Lnet HUB6

Model Rail Electronics — Tue, 05 Sep 2023 20:15:55 +0000

Version 1.1

This module can be used to connect up to 6 LocoNet RJ12 cables. Optionally a 6pin header can be added for experiments.

Sold as do it yourself project containing PCB and 6 RJ12 header connectors.

LocoNet® is a registered trademark of Digitrax, Inc.

DS102 – Lnet HUB4

Model Rail Electronics — Tue, 05 Sep 2023 20:13:36 +0000

Version 1.1

This module can be used to connect up to 4 LocoNet RJ12 cables. Optionally a 6pin header can be added for experiments.

Sold as do it yourself project containing PCB and 4 RJ12 header connectors.

LocoNet® is a registered trademark of Digitrax, Inc.

DS101 – Lnet USB interface & monitor

Model Rail Electronics — Fri, 11 Aug 2023 22:33:19 +0000

Hardware version: 2.5
Software versions: 2.5 for default sketch, 1.0 for Command Station sketch

This module can be used to add a LocoNet bus to a computer running modelrailroad software like iTrain or Rocrail. Additionally the module can also act as a monitor on the LocoNet bus. With the DS101-CS sketch, this interface can act as a stand alone LocoNet Command Station. Read more about this on the product page of the DS101.

Sold as do it yourself project containing PCB and all components. An Arduino Nano 328P is sold separately. The Arduino Nano can be flashed with the necessary sketch using our DS-Installer app. You can find this app on our downloads page.

Built time for an experienced hobbyist: 30 minutes.

LocoNet® is a registered trademark of Digitrax, Inc.